Chestnut Products Cut’n’Polish 225ml ONEID_OVER_18 making them ideal for remounting

making them ideal for remounting finished or partly finished objects for further work

If you're using conventional 12

To fit onto a lathe with 3/4" x 16tpi headstock thread

The straight blade gives an even cleaner and more precise cut than a curved blade

but very sturdy so you can use a lot of force if need be

Chestnut Products Cut’n’Polish 225ml ONEID_OVER_18 making them ideal for remountingCutnPolish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay wet slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of CutnPolish with the lathe