System 42 - Sliding Bolt Track, 4000 mm, Screw size M8, Recommended Spacing c-c Max 100 mm Eye-Jaw Toggle The hole in the base

The hole in the base is a "dead-end" becket for a control line

The marine grade stainless shaft is swiveling but can be fixed in 0° or 90° position with a set screw

L-MAX: 428 mm

this block offers smooth operation and high strength

This is a 22 mm wide and 4000 mm long pin stop track with holes for M5 fasteners

System 42 - Sliding Bolt Track, 4000 mm, Screw size M8, Recommended Spacing c-c Max 100 mm Eye-Jaw Toggle The hole in the base42 mm x 4000 mm long "Sliding Bolt" track. A solid track with no holes for installation, but a groove where hexagon bolts and sealing washers slides in (not included). The bolts (M8, DIN standard) are inserted in the groove with sealing washers (164 483) fitted. Sealing compound is applied between the flanges of the washers. The track is then turned and mounted on deck. This way a retrofit upgrade to new tracks can be made without drilling new holes