CRL Stainless 35 Degree Lower Incline Corner for 1-1/2" Diameter Railing Finish:Brushed Stainless Steel Available in Three Thicknesses: 1/64"

Available in Three Thicknesses: 1/64"

This is especially important where the Base Shoe will be installed on balconies or decks where water could dam up unless proper drainage is available

and then weld the Weld Blocks to the beam

The CRL B7S Series Heavy-Duty Square Base Shoe is used as the base channel for glass railing systems

For use with 1-1/16" (25

CRL Stainless 35 Degree Lower Incline Corner for 1-1/2" Diameter Railing Finish:Brushed Stainless Steel Available in Three Thicknesses: 1/64"Four Standard Angles for the Bottom of a Stair or Ramp Railing Incline Brushed or Polished Stainless Finishes in Six Diameters 304 Grade Stainless Alloy Interior Slip Fit Lower Incline Corners for 1 2" (12 mm) or 5 8" (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Cap Rail. Use our Cat. No. 32629 Metal Contact Cement to achieve a secure and permanent bond. Two Connector Sleeves are required for the use of each