Autopilot Interface Unit | Garmin to 1C388/388MC/388C388MC/1C388-2/388-3 2000-010-245 This terminal block (EDMO# 27212-2-3)

This terminal block (EDMO# 27212-2-3) has three mounting studs with 10/32-inch 28UNF-2A/8 thread size

and used on 16—14 AWG wire

This die set (EDMO# 30-586) is for non-insulated open barrel connectorsThree-cavity die: 22-12 AWGFor commercial type connectorsUse with the 30-506 Crimpmaster(c) frame

For use with RG-58

the PWI LED upgrade is installed using the factory mounting holes and requires no changes to the fixture

Autopilot Interface Unit | Garmin to 1C388/388MC/388C388MC/1C388-2/388-3 2000-010-245 This terminal block (EDMO# 27212-2-3)The AIU 900 is a pre assembled autopilot interface unit following the interconnect specifications and component requirements recommended by the manufacturers of certain PFD systems when interfaced with existing 1C388 series autopilot couplers. This unit is intended to provide a convenient solution in a single device with multiple variations for installers to use in place of producing the same circuits from discrete components as specific in PFD