19 thread Standard Wire with eye terminal, ø10 mm, Length 17,9 m, Furlex 300S/E/TD Split Pin The lower T is attached

The lower T is attached to a Seldén backing plate

Sparcraft: NG60

It features stainless steel ball bearings for high strength under dynamic loads

B-MIN: 106 mm

The PBB60 Single Plain Bearing Block with Swivel and Bow-shackle is ideal for applications where the fixing point requires a wider shackle

19 thread Standard Wire with eye terminal, ø10 mm, Length 17,9 m, Furlex 300S/E/TD Split Pin The lower T is attachedThe original wire for Furlex 300S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000