Straight Guide Post - 3.0 mm x 30 mm Bending Tool Brushes are tapered and graduated

Brushes are tapered and graduated in sizes (C

0 mm implants

The stainless steel 3

4 mm x ID 1/16 in

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

Straight Guide Post - 3.0 mm x 30 mm Bending Tool Brushes are tapered and graduatedThe Straight Guide Post is used to orient the Guide Sleeve to the axis of the hole which has been drilled into the cast. The Guide Sleeve is placed over the Guide Post while gel is applied to form the body of the Diagnostic Surgical Guide. Dimensions: OD 3. 0 mm x 30 mm L Pair with: Guide Sleeve With Cleat 3. 0 mm Short Guide Sleeve With Cleat 3. 0 mm Wide Guide Sleeve With Cleat 5. 3 mm Guide Sleeve Without Cleat 2. 0 mm x 8. 0 mm Guide Sleeve With