Arbor A Driftwood Cross Support Replacement Simply drive the steel stakes

Simply drive the steel stakes 75"  apart with a 2lb + sledge hammer slide each upright over the exposed end of a stake

Images are of trees that I have built and sold and are for representation purposes only

The bottom of the front left and right uprights modified by drilling a 3/4" hole 12 " deep lined with steel tubing

The stake kits  consists of two ($55) or four  ($95) 1/2" x 30" steel stakes (rebar)

Four post arbor can be staked with a two or four stake kit

Arbor A Driftwood Cross Support Replacement Simply drive the steel stakesDriftwood Cross Support for Arbor A 1 84" Long pole 2" 3" Diameter. No predrilled holes. Pole is marked 6" in from each end to line up with inside edge of uprights. Holes will need to be drilled for the bolts to attach to the uprights and the braces. Tools needed : Power drill with a 3 8" bit and a 1 8" bit. Please see image for installation instructions. Turn around time: The item usually ships in 2 3 business days from date of purchase. Shipping: