NTSC/PAL (Television) TFT Display - 1.5" Diagonal _RPI_SD_SDCARD sit down because this product

sit down because this product may shock you

Power supply: 500mAh 3

3V Arduino and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3

We added a bunch of supporting circuitry like a backlight driver and configured it for running basic TTL display panels such as the ones we have in the shop

The monitor will look best if you can set the HDMI output to the matching resolution so try that if you want a good looking display

NTSC/PAL (Television) TFT Display - 1.5" Diagonal _RPI_SD_SDCARD sit down because this productYes, this is an adorable miniature television! The visible display measures only 1. 5" diagonal, the TFT comes with a NTSC PAL driver board. The display is very easy to use simply connect 6 12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's a little button to adjust the LED backlight brightness (5 levels) there is no other adjustment available but we found that the