Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, SMA Connectors 272N06X04 Flush and One Hole Mounted

Flush and One Hole Mounted (OHM) mounting stylesMS approved and QPL'd per MIL-G-7703Covers are molded out of Thermoset molding materialsGuard covers are spring loaded to either close or lock in open positionKeyway orientation variations offered on some guards

They are ideal in high temperature applications such as aircraft engines

This O-ring gasket is used with the Kannad 406 battery kit

gives a faster grasp of an aircraft's overall situation

Flat washer for Shadin OAT sensor

Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, SMA Connectors 272N06X04 Flush and One Hole MountedThe ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2 J4)